Wilier Triestina Urta SLR Shimano XT 1x12 + Miche 966 + Fox 34 Step-Cast Kashima 2025

Break the monotony

URTA SLR is at the height of Wilier Triestina's evolution in the mountain bike sector. A top-tier bike made to provide a more technical and leading-edge cross country cycling experience. The frame has been designed to reach extremely high levels of traction and stability. Thanks to its reliability and efficiency, it is the best solution for those who strive for top performance on XCO/XCM courses.

New geometries
URTA SLR geometries revamp the off-road riding style of Wilier Triestina high-end products. A shorter triangle combined with a 69° steering angle make it compact, fast and balanced, thus improving performance both up the steepest climbs and down the most technical descents. Designed to obtain better traction as well as excellent progressive response, URTA SLR also offers an impressive stiffness-to-weight ratio to ensure rapid accelerations and better responsiveness to sudden changes of direction.

URTA bar integrated monocoque handlebar
Like with all other top-end racing bikes, URTA SLR also features a lightweight carbon fibre monocoque handlebar. It is a solution that treats the frame/handlebar system as a single highly integrated module, making it also possible to cut down the total weight of the bike. The carbon fibre handlebar also allows better vibration absorption, consequently reducing the physical wear caused by very demanding XCO/XCM courses.

Integrated shock absorber
URTA SLR has been designed for 190x45 rear shock absorbers with 100 mm progressive travel. For optimum kinematic performance, the choice has fallen upon the Fox Factory DPS FLOAT 190x45 and the Rockshox Sid Luxe ULTIMATE 190x45, whose optimised compression curves make it possible to work in perfect synergy with the frame. In addition to improving the clean look of the URTA SLR, link integration increases the torsional stiffness of the rear triangle.

Double bottle holder
URTA SLR is equipped by design with a double bottle holder. It is a necessary choice to limit the number of water stops the rider makes mid-race or during longer and more intense training.

Improved stiffness
The triangle has been designed using active swing arm technology, a solution that most efficiently combines vertical flexibility and in-plane torsional stiffness. This allows for even greater shock absorption as well as a more rapid and efficient response of URTA SLR to the power delivered by the rider in any situation. Furthermore, the higher pivot point and the shock absorber integration system add further stiffness to the rear triangle.

Flat mount brakes
The brake callipers mounted on URTA SLR are standard flat-mount, the same as the ones used on racing bikes. Flat-mount brakes guarantee the same braking power as the traditional post-mount brakes for cross country cycling. The absence of the typical post-mount bridge provides the rear chain stays with more balanced flexion to the left and to the right.

UDH™ dropout
URTA SLR mounts a Universal Derailleur Hanger (UDH) that optimises operation of the Sram gear shifters but is also compatible with any next-gen derailleur. Use of the UDH dropout offers a further integrated safety function that allows the gear shifter, in the event of an accident, to rotate without breaking.

Integrated wiring
All gear shifter, brake and shock absorber wiring is integrated within the frame. It is also designed to integrate the wiring for a telescopic seatpost, when present. In addition to maintaining the clean and elegant look of the bike's lines, integrated wiring also provides additional and more adequate protection for the devices.

Monocoque carbon fibre
URTA SLR is made with HUS-MOD carbon fibre, the same type used for Wilier 0 SLR and Filante SLR. The perfect stiffness and the prompt reactivity of URTA SLR are features that derive from the know-how that Wilier Triestina has gained over the years by working in close contact with professionals of the World Tour circuit.

100 mm Suspension fork
URTA SLR mounts ROCKSHOX SID SL ULTIMATE 100mm and FOX 32 STEPCAST FACTORY KASHIMA forks. Top range products with 100 mm travel. This solution makes it possible to reduce the overall weight of the bicycle because the frame is optimised to ensure maximum performance of the 100 mm fork. Locking and unlocking can be adjusted using the remote control installed on the handlebar.

12-Speed gear shifter
The gear range provided by the 12-speed Shimano and Sram single-crown gear shifters (510% gear range with Shimano 10-51 – Sram 10-52 cassettes) make it possible to face any incline and any race terrain, regardless of the length or ruggedness of the course.

Standard silicon chainstay protector and chain guide
The standard silicon chainstay is designed to dampen noises and absorb impact caused by the chain hitting the stay. In addition to providing great protection against scratches and impact, the chainstay protector is made to integrate seamlessly with the clean look of URTA SLR. The chain guide comes as standard. Its purpose is to prevent the chain from falling on bumpy terrains and is indispensable on top-range single-crown MTBs. Like the chainstay protector, it has been devised to integrate perfectly with the overall design of URTA SLR.

Technical Specifications

• Frame: URTA SLR - CARBON MONOCOQUE FRAME HUS MOD
• Rear shox: FOX FLOAT DPS KASHIMA 190x45 mm
• H-Bar: RITCHEY WCS 2X FLAT ALLOY
• H-Bar weight: 236 g +/- 5%
• Stem: RITCHEY WCS TOYON ALLOY
• Headset: RITCHEY COMP
• Shifters: SHIMANO DEORE XT 12S SL-M8100-R
• Brakes: SHIMANO DEORE XT BL-M8100 + BR-M8101
• Rotors: SHIMANO RT-MT800 180 mm CL
• Rear derailleur: SHIMANO DEORE XT RD-M8100-SGS
• Crankset: SHIMANO DEORE XT FC-M8100-1 32T
• Bottom bracket: SHIMANO PRESS-FIT MT8001
• Cassette: SHIMANO CS-M8100 10-51T
• Chain: SHIMANO CHAIN CN-M7101
• Tyres: VITTORIA MEZCAL XC-TRAIL 29"X2.25 TLR
• Saddle: SELLE SAN MARCO SHORTFIT STARTUP
• Seatpost: RITCHEY WCS TRAIL ZERO ⌀ 27.2 mm ALLOY
• Axle: REAR 12X178.5mm P1.0
• Frame weight: 1730 g +/- 5%

Note: Specifications may vary without notice.

Please note: The bikes are assembled according to the manufacturer's specifications with default features according to size. For any assembly requests or specifications other than the basic ones, please contact our costumer service directly before purchase.