Sram Code R disc brake set

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink™ lever mated to Code’s new oversized four-piston caliper. Sram’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency and modulation.

Features

• Lever blade material: Aluminium.
• Calliper design: 4 piston Caliper.
• Master material: Aluminium.
• Pad: Steel-backed sintered.
• Fluid: DOT 5.1.
• Adjustment: tool free reach adjust, contact point adjust, banjo adjust.
• Fixing clamp included.
• Ambidextrous: Yes.
• Hardware: stainless.
• Intended Use: Heavy Duty.
• Real weight front: 307 g, rear 319 g.

Technologies

SwingLink™
Squeeze a new Sram brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision.

Expandable Bladder
Sram’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.

DOT 5.1™
Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. Sram has found that in its systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.

Heat Shield
The stainless steel heat shields breaks the thermal connection between the pad and calliper body, reducing calliper fluid temperature by about 20°C even in the most extreme testing conditions.

Lever Pivot Bearings
Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel.

MatchMaker X (MMX)
The MatchMaker X clamp is more than just a clamp. It’s like having Martha Stewart tidy up your cockpit. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your Sram shifters and Avid brake levers as well as your Reverb XLoc remote, all on two clamps. Short of genetically engineering longer thumbs, it’s the ideal way to put everything within easy reach. Just like Martha would.

PiggyBack™ Reservoir
The brake fluid reservoir on Sram’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.

Lever configuration

Front brake: Ambidextrous (hose length: 950 mm).
Rear brake: Ambidextrous (hose length: 1800 mm).

Brake kit is ready to be used with hoses, fluid, pads and accessory kit for hydraulic hose length reduction included.
Rotors and adapters not included.
Requires Bleeding Edge™ bleed adapter.

Find out more on the packaging of this item.