Specialized S-Works Enduro
This is the bike that defines the very genre that bears its name—the S-Works Enduro climbs with utmost efficiency yet stays calm on even the gnarliest descents. It features a bomber, yet lightweight carbon frame that blissfully tackles the kind of terrain that chews up and spits out lesser bikes.
Technical Specifications
Frameset
Frame: FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT™ Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel.
Seat Binder: Alloy, 38.6mm.
Cockpit
Stem: Deity, 35.0mm
Handlebars: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm.
Grips: Deity, Knuckleduster, Black.
Saddle: Bridge, 155/143mm, Hollow Ti-rails.
SeatPost: RockShox Reverb AXS, 30.9, 1X remote, (S2/S3: 150mm, S4/S5:170mm).
Brakes
Front Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm.
Rear Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm.
Drivetrain
Rear Derailleur: SRAM XX1 Eagle AXS.
Shift Levers: SRAM Eagle AXS Rocker Paddle.
Cassette: Sram XG-1299, 12-Speed, 10-52t.
Chain: SRAM XX1 Eagle.
Crankset: SRAM X01 Eagle, DUB, 170mm.
Chainrings: 30T.
Bottom Bracket: SRAM DUB, BSA 73mm, threaded.
Wheels
Rims: Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h.
Front Hub: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing.
Rear Hub: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing.
Spokes: DT Competition Race.
Front Tire: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3".
Rear Tire: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3".
Inner Tubes: Standard, Presta valve.
Suspension
Rear Shock: FOX FLOAT X2 Factory, Rx Trail Tune, 2-position adjustment, high and low speed rebound and compression adjust, Trunnion mount, 205x60mm.
Fork: FOX FLOAT 38 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 170mm of travel.
Note: Specifications are subject to change without notice.