Bikone DCtech T47 29 Internal Ceramic bottom bracket

DCTech T47 dub Internal Ceramic bottom bracket compatible with T47 frames bikes for Sram dub cranks.

DualCupTech™ automatically aligns bearing faces regardless of external factors. This alignment between the bearings on both sides is crucial and special care is taken in the manufacturing process to reduce this concentricity value to a minimum. The results are incredible, extremely smooth pedalling from day one. DualCupTech™ is not only capable of self-aligning the bearings, but creates a strong central joint without requiring threads or single-piece designs. The result after assembly is that the bottom bracket performs as a solid part and eliminates any noise or movement issues. DualCupTech™  can be assembled and disassembled like any other bottom bracket, without requiring special wrenches or complex instructions.

CeramicBallBearings
Expert maker in high performance bearings. Ceramic ball bearings offer superior corrosion resistance, higher dimensional stability, lower density, higher heat resistance. All this translates into a more efficient material for bottom brackets.

FullySealed
Every dust particle or water droplet is a potential cause of bearing noise or wear. That is why all the bottom brackets are fitted with up to five O-rings to keep dust, water, mud and moisture out of the bottom bracket.

Axial Seals
All the bearings are fitted with not one but TWO seals to protect against dust and moisture ingress. This section is crucial for maximum durability and performance of the bottom bracket.

6061-T6 aluminium
Aerospace quality and precision in one of the most capable aluminiums. Moreover, Bikone has developed a particularly scratch-resistant matt anodising with a finish that would be worthy of any art gallery.

T6 heat treatment
For most aluminium alloys: 6061, 6063 and 7075, the best heat treatment is T6. The T6 heat treatment delivers increased hardness as well as other mechanical properties such as normalisation of its grain structure. This guarantees that all the aluminium products will perform perfectly throughout their service life.

Features

• Bearing: Hybrid Ceramic – ABEC5 / P5 – 2RS
• Cups: aluminum6061 T6 anodized
• Sealing: Radial and dual sealing
  Dimensions: 135 × 60 × 60 mm
• Crankset Diameter: 29mm (dub)
• Frame Diameter: Threaded T47
• Frame Width : 86.5, 92

Assembly specs

• Frame diameter: T47
• Frame width: from 85.5mm (Road crank) to 92mm (MTB crank) wide.
• Cranks diameter: Ø29mm (DUB)

Spacers included

• Ø29mm 2x2mm
• Ø29mm 1x2mm

Producer's note: For a correct compatibility, mountain cranks should be always mount on mountain frames and road cranks on road frames.